BT RESPONSE75 Answering Machine User Manual


 
18
Remote access
You can switch on and operate your answering machine from
another TouchTone phone to play back your messages and memos
Response 75 – Edition 7 – 26th October ’00 – 3370
To keep your messages private, your
Response 75 requires you to enter a
2-digit security code before you can
play back your messages.
For your security code, look at the swing
out label on the underside of the machine.
(You cannot change the security code).
Your security code
To operate your Response 75
remotely
Dial your Response 75 phone
number.
When you hear your outgoing
KEYPAD
message, press the
button.
You will hear 2 beeps.
The message counter on your
Response 75 will flash
A.
KEYPAD
Key in the first digit of your
security code (within 8 seconds).
You will hear a beep.
KEYPAD
Key in the second digit of
your security code. You will hear
a beep.
If you enter the incorrect code,
your Response 75 will
announce
Security code error.
Please enter again
. If you
enter the wrong code again,
your Response 75 will
announce Security code error.
Thank you for calling and then
end the call.
Once you have entered the
correct security code, you can
operate your Response 75
remotely.
If you have no messages, your
Response 75 will announce
You have no messagesand wait
for 8 seconds for you to enter
another remote instruction.
If you have new messages,
your Response 75 will announce
You have x message(s), and
then play them back to you. See
Menu for remote access, page
19 for more remote functions.
To turn your Response 75 on
This is useful if you forgot to
turn on your answering machine
before going out.
Ring your Response 75. It will
answer the call after 20 rings.
When you hang-up, the
answering machine will be
switched on and will answer calls.