Filter
Top Products
Response 75 – Edition 7 – 26th October ’00 – 3370
22
You cannot access remotely
Make sure that the telephone you are
using to access your Response 75 has
a TouchTone
TM
keypad.
When entering your code, make sure
you allow enough time, at least 2 seconds,
between digits for your Response 75 to
recognise each one.
VIP function does not respond
Make sure that VIP is switched on.
See ‘To switch VIP on or off ’, page 15.
To reset
If you encounter a problem and your
Response 75 will not respond to any
button presses, remove the battery
then turn off the power for 10 seconds.
Turning the power back on will reset
your Response 75 to ‘Answer-On’ mode.
Ensure that your Response 75 is
connected to the mains power before
you insert the back-up battery.
All messages will be lost when resetting
your Response 75.
Buzzing noise on answer machine
Your answering machine is too close to
a radio, TV, computer, cordless or
mobile telephone, causing interference.
Move it another metre away.
Clicking from answer machine
In some instances, when the 1471
feature is switched on, you may hear a
series of quiet clicks. This is normal
operation.
No OGM
You may have accidentally pressed the
OGM button for too long when checking
your outgoing message, and recorded a
short silent outgoing message. Re-record
your outgoing message, which will allow
you to delete it if you wish, or re-instate
the pre-recorded outgoing message.