Filter
Top Products
Please note
1471 feature will not work on a
switchboard.
The Response 75 is intended to be
connected to analogue networks and
private switching systems in the United
Kingdom.
It may also be connected to switching
systems that use tone (MF) or pulse
(LD) signalling, with earth or timed
break recall. If in doubt, your switch
supplier or maintainer should be able to
offer help. Advice on connection to BT
switching systems can be obtained by
dialling BT Freefone 0800 800 152.
If you do not have a compatible
switchboard, it cannot be guaranteed
that your Response 75 will operate
correctly under all possible conditions
of connection.
Generally your Response 75 can be
connected to any switchboard where a
simple modern telephone can be used
to make and receive calls. It cannot be
used to answer calls on PBXs configured
for dial 8 night service unless a suitable
adaptor is purchased (not available
from BT).
Connection information
Response 75 – Edition 7 – 26th October ’00 – 3370
25
This product is intended for use within
the UK for connection to the public
telephone network and compatible
switchboards, which support tone
dialling and time break recall. If in doubt
please consult your service provider.
Switchboard compatibility
How many telephones can you have?
All items of telephone equipment have
a Ringer Equivalence Number (REN),
which is used to calculate the number
of items which may be connected to
any one telephone line. Your Response
75 Plus has a REN of 1. A total REN of
4 is allowed, if the total REN of 4 is
exceeded, the telephones may not ring.
With different telephone types there is
no guarantee of ringing, even when the
REN is less than 4.
Only use approved power supply, item
code 872300.
This equipment complies with the
essential requirements of the Radio
Equipment and Telecommunications
Terminal Equipment Directive,
1999/5/E.
Technical information