BT RESPONSE75 Answering Machine User Manual


 
The display will flash for 38 seconds.
It will then show the normal ‘no
messages’ display. The display will flash
slowly until any button is pressed.
3 Plug the adaptor into
a mains power socket
Response 75 – Edition 7 – 26th October ’00 – 3370
5
Setting up
Follow these steps to set up your Response 75 ready for use
Plan the location of your
Response 75
Situate your Response 75 close enough
to the phone and mains power sockets
so that the cables will reach.
To prevent the mains cable being
pulled out accidentally, place the cable
behind the clip on the back of the unit.
If you do not have a modern phone
socket, call
Freephone 0800 800 150
and ask for a BT engineer to come and
fit the correct socket.
This is a chargeable service.
1 Check your telephone
wall socket
2 Plug the mains power
cord into the back of the
machine