Filter
Top Products
25
To cancel message playback or pause
While listening or pausing, press the
0 button. Your Freestyle 1050 gives 2
beeps and you have 8 seconds to give it
another instruction.
To turn your Freestyle 1050 on
If you have gone out without switching
on your Freestyle 1050, you can turn it
on from another phone.
Ring your answering machine as
normal.
Let your telephone ring 20 times.
Your Freestyle 1050 will then answer.
Hang up the phone. Your Freestyle 1050
is switched on and will answer calls.
NOTE
If the memory is full, you will have to delete some
messages before your Freestyle 1050 will switch to
‘Answer On’ mode.
After you hear the ‘Memory Full’ announcement, you
have 8 seconds to enter 2 (to listen to your messages),
or 5 to delete all messages).
To pause a message
Press buttons in order shown
While the message is playing, press the
2 button.
Press
2 again to resume playback.
If you pause for longer than 60 seconds,
the line will be disconnected.
To cancel message playback or pauseTo turn your Freestyle 1050 off
Dial your number and enter your
security code.
Press the
8 button within 8 seconds of
hearing either “End of messages”
or
“You have no messages”.
Your Freestyle 1050 will announce
“Answer off ”.
If you press the
8 button again within
8 seconds, you will turn your
Freestyle 1050 on again and hear the
announcement “Answer On”.
REMOTE ACCESS