Filter
Top Products
22
ANSWERING MACHINE
To go back to the pre-set outgoing
message
Press buttons in order shown
Press the
9 button while your
Freestyle 1050 is waiting for an
instruction.
Your outgoing message is played.
While the message is playing, press the
5 button. Callers will now hear your
Freestyle 1050 pre-recorded message
“Hello, your call cannot be taken at the
moment, so please leave your message
after the tone.”
To screen a call via the handset
When your Freestyle 1050 starts to
record an incoming message, the
handset gives 3 beeps and the
IN USE
light flashes.
Press the
SECRECY/SCREEN button.
You can hear the caller on the handset.
Or
To interrupt recording and talk to your
caller, press the
TALK button.
D
E
L
E
T
E
S
c
r
e
e
n
To change your outgoing message
Press the 7 button twice within 8 seconds
of hearing either “End of messages”
or
“You have no messages”.
Your Freestyle 1050 gives a long beep
after the second press of the
7 button to
tell you it is starting to record.
When you have finished recording your
new message, press and hold the
0
button for 1 second.
Your Freestyle 1050 will beep and play
your new outgoing message to confirm
recording.
To check your outgoing message
Press the 9 button while your
Freestyle 1050 is waiting for an
instruction.
Your outgoing message is played.
At the end you have 8 seconds in which
to give your machine another instruction.