Filter
Top Products
7
Your Freestyle 1050 works by sending and
receiving radio signals between the base unit
and the handset.
The strength of the signal depends on where
you site the base unit and how the aerial is
deployed.
The higher the base unit is located, the better.
An upstairs room is ideal. The following points
should be considered:
• It should be within easy reach of a mains
socket and a telephone socket. A new-style
telephone socket is needed for this product.
If you do not have one, call us on Freefone
0800 800 150.
• Try to avoid locations near metallic obstructions
or electrical appliances, such as TV sets,
fridges, computers, fluorescent lights, radiators,
metal pipes and metal window frames.
• The Freestyle 1050 can be wall mounted by
using the bracket and screws supplied; see
page 34.
Your Freestyle 1050 is now ready for use
SETTING UP
Battery Care
Batteries cannot be overcharged. However, leaving
the handset on the base unit all the time can
deteriorate rechargeable batteries. To get the longest
possible life from your batteries, take the handset off
the base for a few hours each day.
For the best reception
Try to avoid putting the telescopic aerial near other
electrical appliances, fluorescent lights and large
metallic objects such as cookers, radiators and garage
doors as these may cause interference and reduce the
quality of your calls.
7
Plug your Freestyle 1050 into the
phone socket
8
Fully extend the telescopic aerial
on the base unit
9
To plan the location of the
base unit