Filter
Top Products
32
Elements – New Style – Edition 4 – 31.08.06 – 7644
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
3. Press or to select
Dial Mode
and press .
4. Use or to highlight the dial mode you want and
press to confirm your selection.
5. Press r
epeatedly to exit and return to standby.
Recall mode
If your switchboard does not operate with the present recall
setting you can change it to earth loop recall by selecting
Earth.
There are 2 recall mode settings:
Recall – for time break recall. This is the default setting.
Earth – for earth loop recall.
1. Press to open the main menu.
2. Press or until
Setup
is displayed, then press .
3. Press or to select
Recall Mode
and
press .
4. Use or to highlight the recall setting you want
and press to confirm your selection.
5. Press r
epeatedly to exit and return to standby.
Menu
Menu
Menu
Menu
Menu
M
enu
Switch temporarily to Tone dialling
If the dial mode is set to pulse dialling
you can switch temporarily to tone
dialling for the duration of the call.
After you press to get a
line, press and hold
before you
enter the telephone number. The
number you enter will be dialled out
using tone dialling.
Please contact your network provider
is you are unsure which setting to use.
Set-up menu