Filter
Top Products
17
Elements – New Style – Edition 4 – 31.08.06 – 7644
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
Receive a call
When you receive a call, the phone rings, the symbol
flashes, the keypad backlight comes on and the Calls light on
the base flashes.
Call
is displayed and the or
symbol flashes to let you know if it is an external or internal
call.
1. If your handset is on the char
ger and auto-answer is on: pick
up the handset to answer the call.
Or
If your handset is on the charger and auto-answer is off: pick
up the handset and press to answer the call.
Or
If your handset is off the charger, press .
Earpiece volume
During a call you can adjust the volume of the
earpiece/handset receiver. There are 5 volume levels to
choose from.
1. Press to increase or to decrease the volume.
I
NT
EXT
E
XT
Ringer volume
While the phone is ringing, you can
use or to adjust the
ringer volume.
Caller Display
If you have subscribed to your
network’s Caller Display service, the
caller’s number (or name if stored in
the phonebook) is displayed. See
page 37 for more information.
Using the phone
Auto answer
As long as you have auto answer set
to ON you can just pick the handset
up off the charger to answer a call. If
you have switched it off, you will
need to press . Auto answer ON is
the default setting. See page 28 for
more information on auto-answer.
Range
The symbol on the display
indicates when you are in range of the
base. If the symbol flashes and you
hear a warning beep, you are out of
range and will need to move closer to
the base.