Filter
Top Products
Using your BT Glide with a PC
Install the BT Glide Phone Manager from the
supplied CD – this is auto-install.
The following procedure only needs to be followed
the first time you use the PC upload software with
your BT Glide.
First time set-up
1. Once the BT Glide Manager has been started,
double-click on the
Mobile Connection Manager
icon on your PC’s task bar.
2. Double-click on
Add connection, select Bluetooth
connection
, then select either Widcomm Driver
Stack
or Microsoft Driver Stack depending on
how your PC is configured.
3. Make the BT Glide base ‘discoverable’ by
holding
down
the button on the base until you hear
a beep. The In Use light on the front of the base will
flash indicating that the unit is discoverable.
4. Wait for the BT Glide Phone Manager to detect the
Glide base. Once detected, it will be displayed in
the A
ctive devices window. Click
OK.
Once this procedure is completed, you can upload
pictures and ringtones from your PC to your BT
Glide handset.
27Using Bluetooth
®
BT Glide – Edition 07 – 20.01.06 – 7163
If you experience any problems, please call the Helpline on 0870 605 8047
The base is usually detected
quickly, but it can take a
number of minutes on some
occasions. If the In use light on
the base stops flashing during
the detection process, repeat
step 3.
Following times you use
the software
Once you have established an
initial connection as described
opposite, the next time you use
the BT Glide Phone Manager
software it will remember your
BT Glide so you do not need to
make it discoverable or select
which Bluetooth stack to use.