Filter
Top Products
90
BT Equinox 1350 – Edition 4.1 – 27.09.05 – 6576
If you experience any problems, please call the Helpline on 0870 605 8047
Help
Problems Possible cause
You cannot link up
Is the display flashing ? Check that the base is
with the base connected to the mains power and switched on.
Are you are out of range? Move the handset closer to
the base.
Are the batteries low or flat? If so, charge the batteries
or replace them if necessary.
If using more than one base, check that you are connected
to the correct base.
No ring on the handset Check that the ringer volume is switched on, see page 72.
Check that the base is plugged into the phone socket
and that it is also connected to the mains power and
switched on.
Buzzing noise on my Sometimes, your BT Equinox 1350 and other DECT GAP
radio, TV, computer compatible handsets can interfere with other electrical
or hearing aid equipment if placed too close. Try moving it at least one
metre away from such appliances.
The charging does not Check that the base is plugged into the mains socket
appear to be working and switched on.