Filter
Top Products
81
BT Equinox 1350 – Edition 4.1 – 27.09.05 – 6576
If you experience any problems, please call the Helpline on 0870 605 8047
System PIN
The System PIN is used for registering and deregistering
handsets and some other optional settings. The default
System PIN is 0000.
1. Press
MENU then scroll to
Base Settings
and press
OK. Press to highlight
System PIN
then press OK.
2. Enter the current PIN (Original setting 0000) and press
OK.
3. Enter the new PIN, press
OK and enter it again.
4. Press
OK to confirm.
Base settings
If you enter the PIN incorrectly the
screen shows Incorrect Pin.
Protecting your settings
When entering a PIN the digits are
shown as asterisks.
Keep track of your PIN
If you change the System PIN,
keep a record of the new number
by writing in the space provided on
page 101. You need your System
PIN for registering handsets and
for some other optional settings.
Default base settings
Base ringtone Standardmelody 4
Base ringer
volume
5 (max)
Recall mode Timed Break
Dial mode
Tone
System PIN 0000
Handset
priority All handsets
Access code Off