Filter
Top Products
BT Equinox 1350 – Edition 4.1 – 27.09.05 – 6576
If you experience any problems, please call the Helpline on 0870 605 8047
You can create phonebook entries
and adjust some handset settings
such as ringer melody and volume
on an unregistered or out of range
handset.
IMPORTANT
Before registration, make sure the
handset batteries are fully charged
and that you are close to the base.
Expanding your system is easy.
Up to five handsets can be registered and operated from
the BT Equinox 1350.
You can make internal calls between two handsets while
a third is making an external call.
Each handset can be registered on up to four bases.
If you buy new handsets to use with your BT Equinox
1350 they will have to be registered to the base before
you can use them.
Register a new BT Equinox handset
1. Press MENU, then scroll down to
Registration
and
press
OK.
2.
Register Handset
is highlighted. Press OK.
3. If you have more than one base, scroll or to select
the base. Press
OK.
4. Enter the base’s SYSTEM PIN (original setting 0000).
Press
OK.
Additional handsets and bases
86