Filter
Top Products
27
Part 68 of FCC Rules Information
a) This equipment complies with Part 68
of the FCC rules and the requirements
adopted by the ACTA. On the bottom
of this equipment is a label that con-
tains, among other information, a
product identifier in the format
US:AAAEQ ## TXXXX. If requested,
this number must be provided to the
telephone company.
b) A plug and jack used to connect this
equipment to the premises wiring and
telephone network must comply with
the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A
compliant telephone cord and modular
plug, RJ11 USOC, is provided with this
product. It is designed to be connected
to a compatible modular jack that is
also compliant. See installation instruc-
tions for details.
c) The REN is used to determine the
number of devices that may be connect-
ed to a telephone line. Excessive RENs
on a telephone line may result in the
devices not ringing in response to an
incoming call. In most but not all areas,
the sum of RENs should not exceed five
(5.0). To be certain of the number of
devices that may be connected to a
line, as determined by the total RENs,
contact the local telephone company.
For products approved after July 23,
2001, the REN for this product is part
of the product identifier that has the for-
mat US:AAAEQ- ##TXXXX. The digits
represented by ## are the REN without
a decimal point (e.g., 03 is a REN of
0.3). For earlier products, the REN is
separately shown on the label.
d) If this telephone equipment causes
harm to the telephone network, the
telephone company will notify you in
advance that temporary discontinuance
of service may be required. But if
ad-vance notice isn’t practical, the
telephone company will notify the cus-
tomer as soon as possible. Also, you
will be advised of your right to file a
complaint with the FCC if you believe
it is necessary.
e) The telephone company may make
changes in its facilities, equipment,
operations or procedures that could
affect the operation of the equipment.
If this happens the telephone company
will provide advance notice in order for
you to make necessary modifications to
maintain uninterrupted service.
f) If trouble is experienced with this tele-
phone equipment, for repair or warran-
ty information, please contact the num-
bers provided in the Warranty and
Service Section.
Regulatory Compliance
E
N
G
L
I
S
H
BSC500Eng_8.27.qxd 8/27/03 9:54 PM Page 27