Filter
Top Products
16
Hearing Aid Compatibility
The handset has a special coil inside of
it to couple the sound to hearing aids
equipped with T-Switches/T-Coils.
Failsafe Power Operation
In the event of a power failure, you can
still make and receive calls, but the LCD
display, CID/PhoneBook operations,
Nightlite, and Extra Loud Ringer will not
function. The phone will ring, but not
as loud.
Caller ID (CID) and PhoneBook
Operations:
There are six buttons that control the
CID and PhoneBook operations.
Enter/Dial: (ENTER BUTTON)
Works in CID and PhoneBook
mode. Pressing this button in
CID or the PhoneBook mode
will dial the number displayed.
This button also serves as the
Message Waiting Indicator. If a
message waiting access number
has been programmed into the
phone via the Setup Menu (see
page 12), pressing this button
when it is flashing will automati-
cally dial to retrieve messages.
Mode: (MODE BUTTON)
Allows the phone to be switched
from CID call review to the
PhoneBook or vice-versa. If in
stand-by mode, press once to go
into CID mode, or press twice to
go to PhoneBook mode. If in CID
mode, pressing MODE will switch
to PhoneBook mode. If in Phone
Book mode, pressing MODE will
switch to stand-by screen. From
stand-by mode, holding down the
MODE button for 3 seconds will
cause the phone to enter the Setup
Menu. This button also serves as a
New Call indicator.
Scroll Up/Down: ( )
Allows for a scrolling review either
up or down through the CID lists or
the PhoneBook. The list will wrap
around when at the beginning or
the end of the list.
Program: (PROG BUTTON)
Allows numbers on the CID screen
to be saved to the PhoneBook. It will
also allow any number to be saved
manually into the PhoneBook.
Operating Your Telephone
BSC500Eng_8.27.qxd 8/27/03 9:54 PM Page 16