Filter
Top Products
19
2. Lift handset while the entry is
displayed, then press ENTER twice.
The HANDSET icon will appear on the
LCD to indicate phone is off hook.
Using the Option Function
This feature allows you to add a
long distance access code and/or
area code to numbers or delete an
area code from a number stored in
the Caller ID Memory, thus allowing
you to dial directly from the Caller
ID Memory. For example: A number
appears in the Caller ID Memory as
a ten (10) digit number and it is
necessary to dial one (1) plus area
code and phone number to place
the call. If the long distance access
codes and area codes are pro-
grammed into memory, then by
pressing ENTER/DIAL while review
ing a CID number the phone will
show the local area codes and long
distance service codes that can be
added. Scroll UP or DOWN to
highlight the desired code. Pressing
ENTER will append the number and
begin dialing. This function will
also allow you to highlight and
remove an area code from a stored
number to dial the seven (7) digit
local number.
Editing Entry from Caller ID to
Phone Book
Entries can only be edited while in
Caller ID mode. Once the entry has
been transferred to the PhoneBook,
the entry will need to be deleted
and resaved.
To edit and save:
1. Press PROG. The screen will dis-
play SAVE PHONE BOOK, USE
ENTER TO END. The cursor will be
active and the name and number
can be edited.
2. Press ENTER. It will briefly flash
ENTER NAME, then it will list the
name as it appears in CID, and the
cursor next to it – you can edit it at
this point. Press DEL to backspace
until you get to where you want to
start changes, and then complete
the name. Repeat the procedure for
editing the number.
3. After editing is complete and you
are happy with both number and
name press ENTER, the entry will
then be saved in the PhoneBook.
Operating Your Telephone
E
N
G
L
I
S
H
BSC500Eng_8.27.qxd 8/27/03 9:54 PM Page 19