Filter
Top Products
17
Delete/Erase: (DEL BUTTON)
Pressing DEL in either the CID
or PhoneBook modes will remove
the entry displayed. While pro-
gramming a new number into the
telephone, the DEL button will func-
tion like a backspacing erase key.
Pressing and holding the DEL button
while in CID or PhoneBook mode
will delete all the entries in the list.
You will be prompted to confirm this
action before the list is deleted.
Option Function:
This is a software function that lets
the user to add a pre-programmed
area code and/or long distance
code onto a seven (7) or ten (10)
digit CID number if necessary to
dial. If a local area code (codes)
and long distance code are pro-
grammed into memory, then when
the user presses ENTER/DIAL
while reviewing a CID number,
the phone will show the codes
available to add, thus allowing the
call to be dialed from memory.
If EASY mode has been activated
during the setup process, EASY
MODE will be displayed if you
attempt to enter PhoneBook or
Caller ID Memory.
OPERATIONS OF CALLER ID
This telephone automatically displays
an incoming caller’s name and tele-
phone along with the date and time of
the call. It will record up to 70 calls of
up to 11 digits and store the data into
memory. The LED in the MODE button
will illuminate RED to indicate a new
call has been received.
IMPORTANT: You must subscribe to
Caller ID Service from your local tele-
phone company to utilize this feature.
The time and date as well as the total
number of calls and the number of new
calls will be displayed when the phone
is on hook and not ringing. When the
phone is first plugged in, the time and
date will not be displayed. The clock is
set by the network when a CID call is
received. The clock cannot be reset
manually. In event that the phone is
unplugged or a power failure, you must
wait for an incoming CID call to reset
the clock.
Operating Your Telephone
E
N
G
L
I
S
H
BSC500Eng_8.27.qxd 8/27/03 9:54 PM Page 17