Filter
Top Products
15
necessary to interact with the automated
call distribution systems that are used
in many businesses, such as banks. All
numbers entered after that point will
be transmitted as tone signals. The
phone will reset to pulse transmissions
upon hangup.
Flash
Flash is a feature that enables you to
answer a call if you have call waiting.
Please contact your local telephone
company for information on subscribing
to this feature. Pressing the FLASH
button while you are having a phone
conversation will pick up the second
conversation and place the first call
on hold. Press the FLASH button again
to continue your conversation with
the first caller.
Last Number Redial
Redial allows you to automatically redial
the last telephone number you called
(up to 32 digits). To use this feature,
listen for dial tone and press the REDIAL
button once. Your call will be dialed.
The last number dialed will be stored in
the C500 for you until you dial another
phone number or disconnect the tele-
phone from the wall jack.
Headset Jack
The unit includes a 2.5 mm headset
jack for connection of a headset. In the
headset mode, the volume of the head-
set is controlled adjusting the Clarity
Power Dial.
Headset Operation
Press the HEADSET button to enable
the headset mode. Dial as normal. The
HEADSET button will illuminate to indi-
cate the phone is in the headset mode.
You may switch between headset and
handset usage by toggling the HEAD-
SET button.
Ordering a Headset
In the event you wish to purchase
a headset for your C500, please
contact 1-800-733-2355.
Neckloop Jack
A 3.5 mm jack is available for connect-
ing a neckloop. The volume to the
neckloop is controlled by the telephone.
When the neckloop is plugged in, the
handset is disabled.
Operating Your Telephone
E
N
G
L
I
S
H
BSC500Eng_8.27.qxd 8/27/03 9:54 PM Page 15