Filter
Top Products
Installing your Avaya 1230 IP Deskphone
39
3. Plug the country-specific IEC cable into the Global Power Supply,
and then plug the Global Power Supply into the nearest AC power
outlet.
Figure4on page36 shows the connections on the back of the Avaya
1230 IP Deskphone.
Connecting the LAN Ethernet cable
Note: Your Avaya 1230 IP Deskphone supports both AC power and
PoE options, including IEEE 802.3 standard power. To use local AC
power, you can order the optional AC adapter separately. To use
PoE, where power is delivered over the CAT5 cable, the LAN must
support PoE, and you do not need an AC adapter.
Connect your IP Deskphone to your LAN using a
CAT5e Ethernet cable to
enable full functionality of your IP Deskphone. If your Ethernet port is
equipped with Power over Ethernet (PoE), your IP Deskphone can be
powered through the LAN port. Do not extend the LAN Ethernet cable
outside the building.
1. Plug one end of the supplied LAN Ethernet cable into the LAN
Ethernet port on the back of your IP Deskphone marked with the
%
symbol.
2. Thread the cable through the channel in the foot stand.
3. Connect the other end of the cable to your LAN Ethernet connection.
The LAN LED on the back of the IP Deskphone lights when a LAN
connection is established.
4. Connect the other end of the cable to your LAN Ethernet connection.
The LAN LED on the back of the IP Deskphone lights when a LAN
connection is established.
Figure 4 on page 36 shows the connections on the back of the IP
Deskphone.
Connecting the PC Ethernet cable
Connect the CAT5e PC Ethernet cable between your IP Deskphone and
your computer to enable your computer to access the LAN.