Filter
Top Products
Installing your Avaya 1230 IP Deskphone
38
Connecting the headset (optional)
If you have a headset, you can connect the headset to the Avaya 1230 IP
Deskphone. For information on how to use your headset with your IP
Deskphone, refer to “Using a headset” on page 98.
1. Plug the headset cord into the headset jack on the back of the Avaya
1230 IP Deskphone marked with the
) symbol.
Figure4on page36 shows the connections on the back of the Avaya
1230 IP Deskphone.
2. Thread the cord through the channel in the side of the foot stand.
3. Set up the headset according to the headset instructions.
After you have the IP Deskphone working, you must configure the
headset using “Configuring a headset” on page 47.
Connecting AC power (optional)
Your Avaya 1230 IP Deskphone supports AC power or Power over
Ethernet (PoE) options, including IEEE 802.3 standard power.
If you are using PoE, where power is delivered over the CAT5 cable, the
LAN must support PoE. If you use PoE, you do not need an AC adapter.
To use local AC power, use only the Avaya-approved Global Power
Supply (NTYS17xxE6) and country-specific IEC cable. You can order the
Avaya-approved AC adapter and country-specific IEC cable separately.
1. Connect the DC barrel connector to the power jack on the back of the
Avaya 1230 IP Deskphone.
2. Thread the cable through the channel in the foot stand to secure the
cable.
CAUTION
Use only the approved Avaya Global
Power Supply with your Avaya 1230 IP
Deskphone.