Filter
Top Products
23
© 2006 Avaya Inc. All rights reserved.
Additional Configuration Notes (Upgrading from very old
Cisco firmware releases) - Incremental Upgrade Steps
16. Edit the SIPdefault.cnf file and make sure the following line item is changed
back:
– From this: image_version: P0S3-05-3-00
– To this: image_version: P0S3-07-4-00
17. Power cycle the phone
18. The Cisco 7960 SIP phone should convert itself from SIP 5.3 to SIP 7.4 and
register with the extension and password provisioned in the
SIP000943665383.cnf (SIPmacaddress.cnf) file
19. Assuming that Avaya Communication Manager and the SIP Enablement
Server have been properly configured, the Cisco 7960 should be able to make
and receive phone calls at this point.
20. At the 7960 telephone, access the Call Preferences menu. Using the up/down
button, move the highlighted selection to Speed Dial Lines, and press the
Select soft key. The Speed Dial Configuration menu will be displayed. Move
the highlighted selection to the desired speed dial button and press the Edit
soft key to enter the CM provisioned Feature Name Extensions (FNE’s).
CONGRATULATIONS! YOU ARE NOW