Filter
Top Products
This is possible from any telephone with DTMF suffix dialling. In many cases, you can use only
certain pre-set telephones for this feature. Your system administrator will inform you.
"Changing call diversion remotely" must be enabled by your system administrator. Your system
administrator will also tell you the source discrimination code and whether a PIN is required.
1. Dial the call number of your telephone system from the external telephone.
2. Enter the source discrimination code for your system.
You will hear a dial tone as confirmation.
3. Enter the call number of the person for whom you want to change the call diversion.
4. If necessary, enter your PIN.
5. To set up or to change the call diversion, enter the codes for Activate follow-me,
beginning with as asterisk.
6. Enter the system’s external line code and the new destination to which you want to
divert the calls.
As confirmation, an acknowledgement tone sounds after a short time.
7. To deactivate the call diversion, enter the code for Deactivate follow-me.
Appendix Remote features
104 1408/1416 User Guide January 2010