Avaya 15-601076 IP Phone User Manual


 
2410/5410 Phone Page 45
15-601076 Issue 06a (16 July 2009)IP Office
Changing Options: Language
6.7 Automatic Gain Control (AGC)
Automatic Gain Control (AGC) raises the volume when a caller is speaking quietly and lowers the volume when the caller
is loud.
To access Automatic Gain Control:
1. To exit any other mode, press EXIT and then press any below the display.
2. Press Option.
3. Press or until a menu listing the current handset, headset and speaker AGC options is displayed.
4. To toggle a particular setting between Yes and No, press next to it.
Alternatively;
To underline a device type's current setting, press next to it. To change the value of the currently underlined
setting, press Yes/No.
5. Do one of the following:
· To save the settings and return to the Options menu, press Save. You will hear a confirmation tone.
or
· To return to the Options menu without saving any changes, press Cancel.
or
· To return to the call handling screen without saving any changes, press EXIT.
6.8 Default Phone/Erase All Settings
The Erase All option allows you to reset all personalized settings entered through the phone's Option menus (except
contrast level). It also deletes all entries in the phones Call Log and Speed Dial lists.
To erase all settings:
1. To exit any other mode, press EXIT and then press any below the display.
2. Press Option.
3. Press or until a menu entitled "Select item(s) to erase" is displayed.
4. To select/de-select an item for erasure, press next to an item, is shown next to selected items. The items
selectable for erasure are:
· Speed Dials: Selects for erasure all speed dials set in the phone's SpDial store.
· Call Log: Selects for erasure all entries in the phone's call log.
· User Labels: Selects for erasure all customized function key labels.
· Language: Selects to default the phone's language setting back to default.
· Options: Any for erasure or defaulting all other phone options.
· All: Selects for erasure or defaulting all of the above.
5. Press Erase or Cancel.
6. Press Done.