Filter
Top Products
2410/5410 Phone Page 44
15-601076 Issue 06a (16 July 2009)IP Office
6.5 Using Self Test
Self Test can be used to display information about the phone and to check operation of the lamps and display. The
information may be required by your system administrator.
To perform a self test:
1. To exit any other mode, press EXIT and then press any below the display.
2. Press Option.
3. Press Self Test. A screen of information is displayed.
Caution
In the top row, the center of the display should show REL:2.00 or higher. If not the phone’s software needs to be
upgraded. Consult your system administrator.
4. Press and hold Test. The screen lines should all go black and all the phone lamps should come on. If they do
not ,consult your system administrator.
5. Release Test and do one of the following:
· To return to the options menu, press Done.
or
· To return to the call handling screen, press EXIT.
6.6 Language
When the phone is first installed, it is set to display screen text in English. You can select the language that you would
prefer from the following:
English, German (Deutsch), French (Français), Spanish (Español), Italian (Italiano), Dutch (Nederlands), Portuguese
(Português) or Japanese (Katakana characters).
Note
· This does not alter your user language setting on the phone system.
To change the language:
1. To exit any other mode, press EXIT and then press any below the display.
2. Press Option.
3. Press Language. A menu listing the available languages appears, with the current language underlined.
4. Press or next to the language required. The screen text changes to the language selected.
5. Do one of the following:
· To save the settings and return to the Options menu, press Save. You will hear a confirmation tone.
or
· To return to the options menu without saving any changes, press Cancel.
or
· To return to the call handling screen without saving any changes, press EXIT.