Filter
Top Products
2410/5410 Phone Page 42
15-601076 Issue 06a (16 July 2009)IP Office
6. Changing Options
6.1 Changing Ring Options
The IP Office uses 'distinctive ringing' for different types of calls - a repeated single ring for internal calls, a repeated
double ring for external calls and a single ring followed by two short rings for ringback calls. These options are fixed by
the IP Office. The phone's own menus allow its ringer sound to be personalized so you can recognize it from other ringing
phones.
To change the ringer sound:
You can choose from among eight different ring sounds. This alters the tone and style of ringing used by the phone, the
ring pattern is still controlled by the IP Office according to the call type.
Note
· If you receive a call while selecting a ringer sound, you are automatically returned to the Call Handling screen.
1. To exit any other mode, press EXIT and then press any below the display.
2. Press Option.
3. Press Ring Options and then press Ring Pattern. A menu with the current ring pattern appears.
4. To select a ringing pattern, press either or or press a dial pad key between 1 and 8. You will hear the selected
ringing pattern.
5. To hear the ringing pattern again, press Play or re-press the dial pad key.
· When you have selected a ringing pattern, press Save. You will hear a confirmation tone and be returned
to the Options menu.
· If you want to return to the options menu without changing the ring pattern, press Cancel.
To use the Message Lamp for ringing alerts:
1. To exit any other mode, press EXIT and then press any below the display.
2. Press Option.
3. Press Ring Options and set Flash Message Lamp to Yes or No. When set to Yes, the Message lamp will flash
when you receive a call.
To automatically show the call handling screen:
1. To exit any other mode, press EXIT then press any below the display.
2. Press Option.
3. Press Ring Options and set Show Phone Screen to Yes or No. If set to Yes then, when you are setting up/
using Speed Dial, Call Log, etc, you will be automatically returned to the call handling screen when you receive a call.