Filter
Top Products
6
Getting started
Battery installation & charging
Install the battery as shown below. After installing the battery, you can make and
receive short calls. For optimal performance, charge the handset battery for at least
16 hours before use. When fully charged, the handset battery provides approximately
five hours of talk time and three days of standby time.
Step 1
Place the battery
pack and wires
inside the
compartment.
Step 2
Step 3
Plug the battery securely
into the plug inside
the handset battery
compartment, matching
the color-coded label.
Align the cover flat
against the battery
compartment
cover, then slide
it upwards until it
clicks into place
Charge the handset, by placing the
handset face up in the telephone base or
in the additional charger. The CHARGE
light will be on when charging.
Step 4
IMPORTANT INFORMATION
1. Use only the supplied rechargeable battery or replacement battery (model BT8001). To order, visit
our website at www.telephones.att.com or call 1 (800) 222-3111. In
Canada dial 1 (866) 288-4268.
2. See the Troubleshooting section on page 44 for charging issues.