AT&T SL82208 Cordless Telephone User Manual


 
51
Appendix
System announc-
es “Time and day
not set”
You need to reset the answering system clock (see page 33).
System does not
respond to remote
commands
Make sure to enter your remote access code correctly (see
page 40).
Make sure you are calling from a touch-tone phone. When
you dial a number, you should hear tones. If you hear clicks,
the phone is not a touch-tone telephone and cannot acti-
vate the answering system.
The answering system may not detect the remote access
code while your announcement is playing. Try waiting until
the announcement is over before entering the code.
There may be noise or interference on the phone line you
are using. Press dial pad keys firmly.
System does
not record
message
• Make sure answering system is on (see page 39).
• Make sure the memory of the answering system is not
full.
Outgoing
announcement is
not clear
When you record your announcement, make sure you speak in a
normal tone of voice, about nine inches from the telephone
base.
Make sure there is no background noise (TV, music, etc.) while
you are recording.
Troubleshooting