AT&T SL82208 Cordless Telephone User Manual


 
36
Answering system operation
Message playback
Press
PLAY/STOP to hear messages. The system
announces the number of messages, then begins
playback.
If you have new messages, you will hear only the
new messages (oldest first). If there are no new
messages, the system will play back all messages
(oldest first).
Announcement
When playback begins, you will hear the total
number of messages.
Before each message, you will hear the day and time
it was received.
After the last message, you will hear “End of messages.”
If the system has less than five minutes of recording
time left, you will hear time remaining.
Options during playback
Press VOLUME button to adjust speaker volume.
Press SKIP to skip to next message.
Press REPEAT to repeat message currently
playing. Press twice to hear previous message.
Press DELETE to delete message being played
back.
Press
PLAY/STOP to stop playback.
To delete all messages
To delete all old messages, press DELETE while the
telephone is in idle mode, you will hear "To delete
all old messages, press DELETE again.", press
DELETE again to complete the procedure, "All old
messages deleted." will then be announced.
Number of messages stored
(or during playback, message
number currently playing).
NOTES:
1. If F is flashing in the message
window, memory is full. You
will have to delete some
messages before new ones
can be received.
2. New (unheard) messages
cannot be deleted.
3. If the system has many
old messages and is full,
press DELETE. There
will be a voice prompt
to direct you to press
DELETE again to delete
all old messages. This will
take up to 14 seconds.
Press
PLAY/STOP
to begin or end message
playback.
1.
“You have [xx] new
messages and [xx]
old messages”
Message playback begins.
See options at right.
PLAY/STOP
2.
Message playback ends.
PLAY/STOP