AT&T SL82208 Cordless Telephone User Manual


 
15
Telephone operation
Intercom call transfer
Use the intercom feature to transfer an external call
from one handset to another.
Model SL82208
1. During a conversation with an external call, press
INT. The external call is automatically placed on
hold. The handset’s screen will show CALLING
OTHER HANDSET. The destination handset will
ring, and its screen will show OTHER HANDSET IS
CALLING.
2. On the ringing destination handset, press
PHONE/FLASH, INT, SPEAKER, or any dial pad
key (0-9, * or #) to answer the intercom call. You
can now talk without the external caller hearing
the conversation.
3. Press OFF/CLEAR on the originating handset
or place that handset in the telephone base or
handset charger to complete the transfer. The
originating handset’s screen will show CALL
TRANSFERRED and the other handset will
automatically be connected to the external call.
NOTES:
1. Before the intercom call is answered, you can cancel
the transfer and return to the external call by pressing
OFF/CLEAR, PHONE/FLASH, or INT on the originating
handset.
2. If the destination handset does not answer the intercom
call within 100 seconds, or if the other handset is in the
directory or call log mode, or out of range, the originating
handset will show UNABLE TO CALL TRY AGAIN on its
screen and will automatically return to the external call.
3. You can switch between the intercom call and the outside call
by pressing INT on the originating handset. The display will
change between INTERCOM and OUTSIDE to indicate which
party is active.
4. You can end the intercom call and return to the external call
by pressing PHONE/FLASH on the originating handset.