Filter
Top Products
AT&T
Form D2: Telephone Programming (Blank Templates)
MLS-34D PHONES:
Assign to exts.:
Auto. Line Sel.:
MLS-6 and MLC-6 PHONES:
Factory setting is “Outside lines 1, 2, 3, 4, 5, 6, 7, 8; Intercom”
NOTE: An MLS-6 or MLC-6 phone with 4 lines
assigned to it has no programmable buttons.
Assign to exts.:
Auto. Line Sel.:
Factory setting is “Outside lines 1, 2, 3, 4, 5, 6, 7, 8; Intercom”
Summary of Abbreviations
MLS-12 and MLS-12D PHONES:
Assign to exts.:
Auto. Line Sel.:
Factory setting is “Outside lines 1, 2, 3, 4, 5, 6, 7, 8; Intercom”
Assign to exts.:
Auto. Line Sel.:
Factory setting is “Outside lines 1, 2, 3, 4, 5, 6, 7, 8; Intercom”
NOTE: Line buttons are programmable
only if they are not used for lines.
= Do Not Disturb
LNR
= Last Number Redial
GRP-CALL
= Group Call
= Fax Management Extension
DND
FAX-(x)
PRIV
= Privacy
SNR
= Save Number Redial
GRP-PAGE
= Group Page
where (x)=fax extension [example: FAX-11]
EXHOLD
= Exclusive Hold
MSG-ON
= Message Light On
LOUDSPK
= Loudspeaker Page
EXT-(x)
= Auto Dial (Ring)—Ext.
DROP
= Conference Drop
MSF-OFF = Message Light Off PICKUP-GRP
= Call Pickup Group-Answer
where (x)=ext. [example: EXT-10]
PAGE-(x)
= Auto Dial (Page)—Ext.
RECALL
= Recall
TT-EN
= Touch-Tone Enable
PICKUP-(x)
= Pickup Extension
where (x)=ext. [example: PAGE-10]
where (x)=extension number
AUTO
= Auto Dial—Outside Number
Button with lights required Button with lights recommended (but not required)
[example: PICKUP-11]
Put telephone number or name on template
[example: John]