Filter
Top Products
AT&T
Form D1: Telephone Programming (Standard Templates)
MLS-34D Telephone
Template 1*
(Ext. 10)
●
Intercom Auto Dial Numbers
●
Group Paging
●
Night Service On/Off
●
Loudspeaker Paging
●
Fax Management
(indicate fax machine extension)
●
Message Light On
●
Message Light Off
NOTE: This standard template is
recommended for extension 10,
typically the receptionist’s extension.
Unused line buttons are
programmable
Auto. Line Sel.:
Factory setting is “Outside lines 1, 2, 3, 4, 5, 6, 7, 8; Intercom”
Example
To assign the template to Exts. 11, 12, 15, and 16 (exts. 11 and
12 to have factory-set Automatic Line Selection, exts. 15 and 16
to be programmed to select the Intercom first, followed by
outside lines 2, 1, and 4):
Assign to exts.:
Auto. Line Sel.:
MLS-12 or MLS-12D Telephone
Template 2*
●
●
●
●
●
Outside Auto Dial Numbers
Do Not Disturb
Privacy
Save Number Redial
Last Number Redial
Unused line buttons are
programmable
Assign to exts.:
Auto. Line Sel.:
Factory setting is “Outside lines 1, 2, 3, 4, 5, 6, 7, 8; Intercom”
Assign to exts.:
Auto. Line Sel.:
Factory setting is “Outside lines 1, 2, 3, 4, 5, 6, 7, 8; Intercom”
✱
Descriptions of these and other programmable features (with suggested abbreviations) are on the reverse side of this form.