Filter
Top Products
43
Answering System Operation
43
1.
Remote access
A two digit security code is required to access your
answering system from any touch-tone phone. This code
is 19 by default; see page 39 to change it.
Dial your telephone number from
any touch-tone phone.
2.
When system answers, enter
two digit remote access code (19
unless you have changed it).
3.
Enter remote commands
(see list at right).
4.
Hang up to end call and save all
undeleted messages.
Play all messages
1
Play new messages
2
Delete the message
3
33
Repeat or go back
4
Stop
5
Skip to next message
6
Record announcement
*7to begin recording
5to stop recording
Help menu
*5
Turn system off
0
Turn system on
0
Exit
8
Press to hear all messages.
Press to hear new messages.
Press during playback to delete current
message. Press 3 twice to delete all old
messages.
Press during the caller’s message to
repeat the message. Press during the
beginning of the day and time announce-
ment to go back to the previous mes-
sage.
Press to stop any operation (stop play-
back, stop recording).
Press to skip current message and
advance to next message.
Press * 7, wait for beep, then begin
speaking. Press 5 to stop recording and
hear playback of new announcement.
Press to hear list of features & com-
mands.
Press to turn off answering system.
Incoming calls will no longer be
answered.
If off, system will answer after 10 rings.
Enter your access code, then press 0 to
turn on.
Press 8 to end remote access call or
hang up.
NOTE: If you pause for
more than 4 seconds during
remote access, you will hear a
help menu listing all features &
commands. If you issue no
command for another 20 seconds,
the call will end automatically.