Filter
Top Products
28
Directories
28
Directories
1
^DIR
DIRECTORY
2
^DIR
ADAM
5551234
3
SELECT/TRANSFER
^DIR
^DIR
To copy, edit or delete an entry
You can make existing directory entries Speed Dial entries
if they are stored in the handset. You can also change
names, numbers and the distinctive ringing settings, or erase
entries, that are stored in the cordless handset or the base.
When any entry is displayed, press
SELECT/TRANSFER to
see the options. Press CIDV or ^DIR to highlight the
option you want (blinking text), then press SELECT/
TRANSFER.
To make an entry a Speed Dial entry (cordless
handset only)
When
SPEED
is blinking, press SELECT/TRANSFER, then
dial a memory location (1-9) to make this entry a Speed
Dial entry.
If you choose a memory location that is already
assigned to a different entry in the directory, that entry
will remain in the directory, but will not have a SPEED
DIAL location.
To edit an entry
Press ^DIR until
EDIT
is blinking, then press SELECT/
TRANSFER. You can change the name and number (or dis-
tinct ring
setting on the cordless handset) by following the steps
described on pages 25-26.
To delete an entry
Press ^DIR until
ERASE
is blinking, then press SELECT/
TRANSFER to display a confirmation screen (
ERASE NO
YES
).
To delete the entry, press ^DIR to highlight YES, then
press SELECT/TRANSFER.
To abort the procedure and leave the entry intact, press
CIDV to highlight NO, then press SELECT/TRANSFER.
Press SELECT/
TRANSFER to choose
blinking option on the
handset.
NOTE: Screens shown
above are displayed on the
cordless handset. The base
display is slightly different, but
the procedure is the same.
NOTE: See Page 27
for instructions on dialing a
directory entry from the base.
EDIT DIAL ERASE
5551234
EDIT DIAL ERASE
5551234
EDIT DIAL ERASE
5551234