Filter
Top Products
7
Getting Started
Battery installation & charging
After battery installation, place the cordless handset in the charger and allow to charge
for at least 16 hours before use. You can keep the battery charged by returning the cord-
less handset to the charger after each use. When the battery is fully depleted, a recharge
takes about 12 hours. The average talk time on a fully charged battery is about five hours
depending on environmental conditions, and the standby time is approximately five days.
Plug the battery pack
connector into handset.
Low battery indicator
Return handset to charger when this
symbol appears.
NEEDS RECHARGING
-- 1 --
8/12 10:06
AM
Place handset in charger for at
least 16 hours before first use.
Plug power adapter into jack on
underside of charger as shown,
then plug into an electrical outlet
not controlled by a wall switch.
Place the battery pack
and wires in the com-
partment.
Caution: Use only the supplied rechargeable battery pack or AT&T replacement battery model 3301 (SKU 91076.
Part number 80-5071-00-00).
BATTERY LOW
-- 1 --
8/12 10:06
AM
then
NOTE: If you need a battery pack replacement, call 1-800-222-3111. In Canada, call 1-866-288-4268.
Press in and downward on
the tab to open the battery
compartment cover.
Slide battery compart-
ment cover up until it
clicks closed.