Filter
Top Products
11
Telephone Operation
Handset settings
Set handset date and time
The handset displays the date and time when you are
not using it. You can set the time manually, or you can
allow it to be set automatically with incoming Caller
ID information. The time will be set automatically only
if you subscribe to Caller ID service provided by your
local telephone company (see page 5).
• Press
MENU/CHAN to begin programming.
• Press CIDV twice. The screen shows DATE/TIME.
Press SELECT/TRANSFER to confirm.
• The month in the displayed date starts to flash. Use
CIDV and ^DIR to scroll through the numbers 1,
(for January,) -12, (for December.) Press SELECT/
TRANSFER when the appropriate month is flashing.
• The date starts to flash. Use CIDV and ^DIR to
scroll through the numbers 1-31. Press SELECT/
TRANSFER when the appropriate date is flashing.
• The hour starts to flash. Use CIDV and ^DIR to
scroll through the numbers 1-12. Press SELECT/
TRANSFER when the appropriate hour is flashing.
• The minute starts to flash. Use CIDV and ^DIR to
scroll through the numbers 00-59. Press SELECT/
TRANSFER when the appropriate minute is flashing.
• The AM/PM starts to flash. Use CIDV and ^DIR to
toggle between AM and PM. Press SELECT/TRANSFER
when the appropriate option is flashing, save the
selection, and exit.
NOTE: You can choose to set the time manually, or you can allow it to
be set automatically with incoming Caller ID information. The time will be set
automatically only if you subscribe to Caller ID service provided by your local
telephone company .
DATE/TIME
1/01 12:00
AM