Filter
Top Products
12
Telephone Operation
Handset settings
Set handset ringer tone
This feature allows you to choose one of 4 ringing
tones, (1-4) or turn the ringer off ( 0 ). Use the
CIDV
or ^DIR button to hear an example of each ringer tone,
then press SELECT/TRANSFER to select the one you pre-
fer.
• Press MENU/CHAN to begin programming.
• Press ^DIR twice. The screen displays
RINGER:
and
setting.
• Press SELECT/TRANSFER to change current setting.
• Press CIDV or ^DIR to display 1, 2, 3, 4, or OFF. You
will hear a sample of each ringer tone.
• Press SELECT/TRANSFER to select the displayed ringer
tone and exit.
Set handset ringer volume
• Press and hold CIDV or ^DIR for about 2 seconds.
• When the screen displays OFF LOW HIGH, the
current setting will flash.
• Press CIDV or ^DIR to select your preference.
• Press SELECT/TRANSFER, PHONE/FLASH, OFF/CLEAR,
or MENU/CHAN to confirm and save your selection,
and exit to idle mode.
NOTE: Handset ringer volume can also be temporarily adjusted by
pressing CIDV or ^DIR (OFF LOW HIGH) or OFF/CLEAR
during incoming ringing. The next call will ring normally.
RINGER: 1