Filter
Top Products
11
Telephone Operation
Basic base operation
Making and answering calls
To answer a call, lift the base handset, press SPEAKER-
PHONE, or press HEADSET (if a headset is connected).
To make a call, lift the base handset, press SPEAKER-
PHONE or press HEADSET, then dial a number.
To choose a line, press L1 or L2, then lift the base
handset, press SPEAKERPHONE or press HEADSET,
then dial a number.
To preview numbers before dialing, enter numbers first,
then press SPEAKERPHONE or HEADSET to dial. Press
CLEAR to make corrections as you enter numbers.
To hang up, replace the base handset, press SPEAKER-
PHONE or press HEADSET.
Last number redial
Press RDL to view the last 5 numbers called (up to 32
digits each). Use the ^V buttons to select a number,
then press L1/L2+SPEAKERPHONE to dial. Press SELECT
then ERASE to delete this number from the redial
memory, or SAVE to copy it into your phonebook.
Hold and mute
Press HOLD to place a call on hold. Press L1/L2, then
SPEAKERPHONE or HEADSET to resume the call.
Press MUTE to silence the microphone. You will be able
to hear, but your caller will not be able to hear you
until you press MUTE again to resume speaking.
Call transfer
During a conversation you can transfer the call to a handset.
Press TRANSFER to display a list of sets. Use the ^V
buttons to highlight the set you want, then press OK to
transfer the call to the remote set.
To announce your call, press HOLD before you press
TRANSFER. When the recipient presses INTERCOM to
answer, you can talk privately. After you (or the
recipient) press INTERCOM to end the intercom call, the
recipient can answer the transferred call.
Volume
Speakerphone
BASE
RDL MEMMENU
HANDSET2 2
HANDSET1 1
HANDSET3 3
^ V
OK
VOL MUTEHOLD
H
ATT-2562CIB-d4.qxd 12/29/2003 6:22 PM Page 11