Filter
Top Products
10
Telephone Operation
Basic handset operation
Making and answering calls
To answer an incoming call, press L1 or L2. Press L1 or
L2 to make a call on line 1 or line 2, then dial a number.
Press OFF to hang up. To preview before dialing, enter
numbers first, then press L1/L2 to dial. Press CLEAR to
make corrections as you enter numbers.
Hands-free speakerphone calls
To answer a call, press SPEAKER. To make a call, press
SPEAKER, then dial a number. During a call you can
press SPEAKER to toggle between hands-free speaker-
phone and normal handset use. Press OFF to hang up.
Last number redial
Press RDL to view the last 5 numbers called (up to 32
digits each). Use the ^V buttons to select a number,
then press L1/L2 to dial. Press SELECT then ERASE to
delete this number from the redial memory, or SAVE to
copy the number into your phonebook.
Hold and mute
Press HOLD to place a call on hold. Press L1/L2 (or
L1/L2, then SPEAKER) to resume the call.
Press MUTE to silence the microphone. You will be able
to hear, but your caller will not be able to hear you
until you press MUTE again to resume speaking.
Call transfer
During a conversation you can transfer the call to the
base or to another handset.
Press XFER to display a list of sets. Use the ^V
buttons to highlight the set you want, then press OK to
transfer the call to the remote set.
To announce your call, press HOLD before you press
XFER. When the recipient presses INTERCOM to
answer, you can talk privately. After you (or the
recipient) press INTERCOM to end the intercom call, the
recipient can answer the transferred call.
HANDSET 1
RDL MEM
MENU
VOL MUTEHOLD
HANDSET2 2
BASE 0
HANDSET3 3
^ V
OK
H
ATT-2562CIB-d4.qxd 12/29/2003 6:21 PM Page 10