Filter
Top Products
1. Programming Phone Directory
1. Turn on the TTY.
2. Hold down and press 1 to select
directory.
3. Type in name (up to 9 charac-
ters) and press .
4. Type in the phone number (up to 18 dig-
its). Press to go on to the next
directory entry.
5. When finished, hold down and
press to return to normal
TTY operation.
NOTE: A comma (,) may be entered any-
where in the digit string as a 2-second pause
during dialing. See Page 18 to store an ASCII
phone number
2. Editing Phone Directory
1. With the TTY on, hold down and
press 1 .
2. Press to scroll names in the
directory. Press to select
name and number.
3. If you want to change the number of
the person, press key to
move the blinking cursor to the right
of the digit you want to change,
press to erase the digit
Your TTY comes preset with the following
modes of operation:
1. "Hello, GA" greeting to greet callers when
you press and G simultaneously.
2. "Thank you for calling, please leave a
message, GA" for auto answer outgoing
message.
3. The printer prints incoming messages in
upper case and outgoing messages in
lower case.
4. Characters are scrolled from right to left
on display screen.
5. Tone dialing, the most common
telephone mode of operation.
6. Slash (/) punctuation key as password for
remote message retrieval.
7. Toll Saver automatically answers first call
after five rings and subsequent calls with-
in two rings.
8. Interrupt feature and automatic identifica-
tion tone are enabled.
NOTE: If you want to change any of the fac-
tory preset modes of operation, please follow
the steps on pages 8-10 for each function.
Later on, if you want to reset your TTY to all
the factory preset modes of operation, see
Chapter 7 Section F.
1. Turn on the TTY.
2. Hold down and press 7 to select
option.
3. The screen displays .
4. Type in
Y for yes and enter your local
relay service number.
Press to save.
5. Hold down and press
to return to normal TTY operation.
CHAPTER 5
SETTING UP YOUR TTY
EDIT RELAY NBR? Y/N
A. Relay Number Voice Announcer
Your TTY comes ready to use. However, for your
convenience, we suggest you set up two basic fea-
tures: The Relay Number Voice Announcer to
inform the hearing caller to call Relay Service, and
Phone Directory for memory dialing.
B. Phone Directory for Memory Dialing
C. Factory Preset Modes of Operation
(to the left of cursor) and type in the
correct digit. Press to save the
revised number and return to normal
operations.
4. If you want to erase the name and the
phone number, press key
repeatedly and until it goes beyond
the last digit of the number and
CLEAR ENTRY? Y/N appears on the
screen. Type Y for yes to erase.
ENTRY CLEARED flashes on screen
and returns the TTY to normal
operation.
3. Printing the Phone Directory
1. Turn the Printer on .
2. Hold down and press 1 .
3. Hold down , press P .
7