Filter
Top Products
CHAPTER 7
(CONTINUED)
A new automated tele-access menu system is
available in some areas. This system allows TTY
users to access information such as airline
schedules, bank accounts, and government
office services through an option menu transmit-
ted in Baudot. Users enter their choice of
options by pressing the number keys of a tone
dialing phone or TTY.
2. When connected, press and F
simultaneously. This puts the first party on
hold. then appears on
the screen. Enter the phone number of the
second party and press .
3. When the call is answered, to bring the
first party back, press and
F
simultaneously again. The screen flashes
momentarily. You
can now communicate with both parties
at the same time.
4. If you receive no answer or a busy signal
with your second party, press
and
F simultaneously to generate the
signal. Wait one
second and then press these keys again
to generate a second
signal. This returns you to the first party.
5. When the conversation is over, turn off
the TTY.
3-way calling feature is an optional service of-
fered by your local phone company. It allows you
to hold a three way conversation with friends, rel-
atives, or business associates. You must sub-
scribe to this service and it is operable only when
you're in direct telephone connection mode.
1. Call the first party as you normally would.
C. 3-Way Calling
D. Telebanking, Credit Card Calling, and
Using DTMF Tone Signaling
E. Checking Available Memory
Your DIALOGUE III/III-P TTY has a total mem-
ory capacity of 32K, which is approximately
32,000 characters (i.e. equivalent to about 13
letter size typed pages). About 500 characters
are used for programming the internal control in-
structions of the TTY. Of the remaining memory,
8,000 characters (equivalent to 3-1/2 pages) are
used for memo storage: 1500 characters (ap-
proximately 50 names and phone numbers) for
the phone directory, 17,000 characters (about 7
pages) for recording messages, and the remain-
ing 5,000 characters (about 2 pages) for record-
ing conversations.
CHECKING MEMO MEMORY:
1. To check the memory available, Hold
down and press
2 to go to the
memo screen.
2. Hold down and press L to list the
number of free characters available for
storing new memos.
3. Press while holding down
to return to normal TTY operation.
HOOK SWITCH FLASH
ENTER PHONE NO=
HOOK SWITCH FLASH
1. Make the TTY call as usual. If the auto
mated system is operating correctly, there
should be an announcement telling you
what to do.
2. When the system prompts you to press a
number on your phone, hold down
and
D . TONE SIGNAL MODE:
will appear on the screen.
3. Press the numbers you want to send to
the keyboard. The pound sign (#) or
asterisk (*) can be generated by simulta-
neously pressing and
3 , or
and 8 , respectively.
4. This mode is cancelled automatically
when you press any TTY key except (#),
or (*), or the number keys.
HOOK SWITCH FLASH
15