Filter
Top Products
CHAPTER 5
(CONTINUED)
4. Changing Password for Remote Message
Retrieval
5. Turning Off Toll Saver and Selecting the
Number of Rings for Auto Answer
DIALOGUE III and III-P are the world's first
TTY's equipped with the exclusive
TOLL-SAV-
ER. This feature allows you to remotely check
your answering system and not incur any toll
charges if there are no messages. With
TOLL-
SAVER activated, your TTY automatically
answers the first call after five rings and every
subsequent call in two rings. Any old messages
remaining in memory will also be counted. It is
recommended you clear all messages as soon
as possible.
6. Transmission Speeds
7. Call Interrupt
In order to prevent any unauthorized access to
your recorded messages, set up an Auto An-
swer access password. Once created, it is set
until you change it. If you forget your password,
you can simply create a new one.
1. Hold down and press 7 .
2. Press repeatedly until screen
CHANGE PASSWORD? Y/N appears.
3. Press Y to change the screen to
PASSWORD:/ .
4. Type a password (up to 9 characters
long) PASSWORD:/MYPASS , for example.
Press to save your selection.
5. Hold down and press .
to go back to normal TTY operation.
1. To turn the TOLL-SAVER feature off, hold
down and press 7 .
2. Press five times until
TOLL-SAVER ON Y/N appears on the screen.
Type N for No to turn this TOLL-SAVER
feature off.
3.
AUTO ANSWER RING (2) appears on the
screen.
4. Press to change the number
of rings directly. Press to save.
5. Hold down and press
to return to normal TTY operation.
DIALOGUE III/III-P allows the other TTY to in-
terrupt your typing and ask for attention. When
this happens, "
INTERRUPT " flashes on your
screen and the lamp flasher also blinks. You
may continue to type or you can stop and wait
for a response. If both parties are using DIA-
LOGUE III/III-P
, you may interrupt each other
by holding down and pressing
I .
If you're using a TTY other than
DIALOGUE
III/III-P, to interrupt the DIALOGUE III/III-P
user you must hit the five to ten
times until you get an acknowledgment. If you
want to turn off the Interrupt feature, follow these
steps:
1. Hold down and press 7 .
2. Press once and the screen
reads INTERRUPT ON? Y/N .
3. Press N to turn off Interrupt feature.
4. Hold down and press
to return to normal TTY operation.
There are two accepted standard TTY message
transmission speeds: U.S. Standard (45.5
Baud) and International Standard (50 Baud). In
order for one TTY to talk to another, they both
must be set at the same standard (speed). Your
DIALOGUE TTY is preset to the U.S. Standard.
To make or receive a TTY call outside of U.S.,
U.K., or Canada, you may have to change to
the International Standard. Once changed, it will
remain at that speed until changed again.
1. Hold down and press 7 .
2. Press repeatedly until the
speed is displayed: (U.S. 45) SPEED
3. If you need to set it to international
speed, press the space bar. The screen
will show (INTL. 50) SPEED
4. Everytime you press the the
transmission speed changes.
Press to select the speed
shown on the screen.
5. Hold down and press
to return to normal TTY operation.
9