Filter
Top Products
5. Last Number Redial
1. With TTY turned on, hold down
and press – to redial the last number
dialed . The number will be displayed on
the screen.
2. After the conversation is over, turn off the
TTY.
6. Auto Busy Redial
This feature makes dialing a busy number
easy. It puts your call through automatically
as soon as the line is free. The built-in
signaler flashes to alert you when your call is
being connected.
1. Hold down
Shift and press - .
2. The screen shows the number of dialing
attempts and the number of seconds
before it redials. 1ST REDIAL TRY 60
3. To stop redialing, press any key or turn
TTY OFF.
4. If it still cannot get through after 30 trials,
it will hang-up automatically.
3. Memory Dialing:
CHAPTER 6
(CONTINUED)
ENTER PHONE NO.
B. Answering A Phone Call
Before you can dial from memory, you must
have the names and phone numbers stored in
the directory. See Chapter 5 on how to create a
phone directory.
1. Turn on TTY.
2. Hold and press 0 to start the dial-
ing sequence. is dis-
played on your screen.
3. Type in the name of the person you are
calling then press to enter your
selection.
4. Or: Press the to scan the
telephone directory. To scroll backward,
press . When the de-
sired name appears, press
to enter the selection.
5. Your TTY then starts the dialing sequence
as in manual dialing from Keyboard.
4. Calling 911 Emergency Number:
(911 Emergency Number may not be
available in some areas)
1. To make a 911 emergency call, hold down
and press
0 to start the dialing se-
quence.
2. Type in 911 and press (If you
make a mistake in typing 911, press
to delete the mistake and
retype).
This automatically turns on AMERIPHONE’S
exclusive Emergency Call Announcer (ECA)
and sends out a message for help. You will
see a series of
HELP! HELP! GA go across your
screen at about three second intervals. This
makes it easier for emergency dispatchers to
recognize your call as a TTY emergency call
and greatly improves the response time for
help. The message continues automatically
thus allowing you to leave your TTY to attend
to other matters. It stops as soon as the dis-
patcher begins to type. To discontinue this
emergency message at any time, press
.
3. You may also manually activate the ECA
anytime by holding down Shift and
typing 911.
1. When there is an incoming call, the built-in
signaler will flash to let you know that your
telephone is ringing. Please note that the
AC adapter/charger must be plugged into
an electrical outlet and the optional signal-
er ON/OFF switch located on the rear of
the TTY must be ON in order for the sig-
naler to function.
2. Turn on the TTY.
3. Hold down and press
G to answer
with the preset greeting message
(
HELLO, GA ) or type a greeting message.
When you see an incoming message, go
ahead with your conversation.
4. If there is no incoming message displayed
and the SIGNAL indicator light flickers, it
may be a voice call. Hold down and
press
V to turn on the relay voice
announcer. The electronic voice will
repeat and be displayed on the screen
until the caller switches to a TTY or when
you start typing.
11