Filter
Top Products
29
GETTING STARTED APPENDIX
USING THE PC MASTER STATION
Auto recording
When the call button is pressed at a video door station,
a snapshot or video of the image at the door is recorded
automatically.
When [Audio Recording] is set to ON:
When called from a sub station, recording of the sounds at
•
the station automatically starts when a communication is
started.
When called from a master station, recording of the sounds
•
at the station starts immediately.
If you want to stop video recording, click .
* turns into .
NOTE:
During recording, the square part in
is illuminated.
Manual recording
You can record a snapshot or video of the image at the
door (and sounds depending on the setting) manually in the
following states.
When called from a video door station
•
When monitoring a video door station
•
When communicating with a video door station
•
■
How to perform manual recording
Snapshot recording
Click when called from, monitoring or communicating
with a video door station.
NOTE:
You cannot record sounds.
Video recording
You can also record sounds from a sub station or master
*
station by this method depending on the setting.
Click
1
when called from, monitoring or
communicating with a video door station.
*
turns into
during recording.
Click
2
to stop video recording.
NOTES:
When you click
•
while recording during monitoring, recording
continues until the set communication time has elapsed or until
is clicked.
When communication starts while recording during monitoring,
•
you can continue the recording. When the communication or
monitoring ends, recording stops.
During recording, the square part in
•
is illuminated.