Filter
Top Products
13
GETTING STARTED APPENDIX
USING THE PC MASTER STATION
Answering a call
The maximum duration of communication is preset in the
System setting. (It can be set to a maximum of 10 minutes.)
Answer the call in one of the following ways.
1
■
Communication in the hands-free mode
(Available when “Communication method” is set to
“Hands-free” in the Setting window.)
<When called in from a sub station>
Click
1)
.
After a beep, you can communicate in the hands-
free mode.
*
1
: When talking: Lit
When listening to the caller: Off
When you have fi nished the communication,
2)
click .
Communication will end.
You can communicate in the press-to-talk mode by the
*
following operation even when "Hands-free" is set (e.g.,
when it is noisy around you).
Click and hold
•
for more than one second while
communicating. (Beeps once.)
<When you received a direct voice call from
another (PC) master station>
You can talk back to it. If you click and hold for
more than one second, it changes to the press-to-talk
mode. (Beeps once.)
■
Communication in the press-to-talk mode
(Available when “Communication method” is set to
“Press to talk” in the Setting window.)
<When called in from a sub station>
Click
1)
momentarily.
After a beep, you can communicate in the press-to-
talk mode.
Click and hold
2)
to talk and release to listen to
the caller.
When you have fi nished the communication,
3)
click .
<When you received a direct voice call from
another (PC) master station>
Click and hold to talk with and release to listen to
the caller.
[OFF]
[TALK]*
1
[OFF]
[TALK]
Click and hold.
(When talking) (When listening to the
caller)
Release.