Filter
Top Products
12
RECEIVING AND ANSWERING A CALL ON THE PC MASTER STATION
The following describes the communication method using a PC master station.
When receiving a call from a remote site, the operation methods are the same as described below, however it may take a longer
*
time for some operations and their responses. For example, there may be a time difference between a call starting at a remote site
and the call tone ringing on the target (PC) master station in your site.
Receiving a call
The call tone rings, and the corresponding display appears.
1
The call tone from a sub station differs from the setting in the Setting window. (→"SETTING MANUAL")
*
e.g.) When called from a video door station
When an audio door station, room sub station or another (PC) master station calls in, the station type image is displayed. (The
*
image differs from the calling station type.) When called from a remote site, the remote site symbol image is displayed.
An incoming call from a (PC) master station will be a direct voice call. (However, when the PRIVACY mode is set to “Privacy 2”,
*
you will be notifi ed of an incoming call by the display information and call tone.)
NOTES:
A PC master station cannot receive two or more calls at a time.
•
A call or talk may not be possible when the communication path is fully occupied.
•
Video images at the target video door station may not appear on the monitor when the video path is fully occupied even though a call or talk
•
is possible.
Door station
(in your site or a remote site)
Press
Press
or
Lift the
handset.
Room sub station
(in your site or a remote site)
Master station
(in your site or a remote site)
Another PC master station
(in your site or a remote site)
(See page 25 for
how to call from a
PC master station.)
(See the “OPERATION
MANUAL” for the standard
(IP) system or network
direct system.
or or
or
USING THE PC MASTER STATION
The video image at the calling station is
displayed following the symbol image.
* It may take long until a video image appears.
The station no. and station name are displayed.
(For a remote site, the number and name of the site are displayed.
The station name will not be displayed.)