Filter
Top Products
28
RECORDING
The PC master station can record images and/or sounds from other stations automatically or manually.
The recording operation differs from the settings in the Setting window as listed below. Refer to the SETTING MANUAL for the
*
recording settings, and change the settings as needed.
Setting
Description
Picture Recording Mode Auto Recording Audio Recording
Snapshot
ON
(Auto Recording)
(Not available)
When there is a call from a video door station, only one
snapshot of the fi rst displayed image at the door is recorded
automatically.
OFF
(Manual Recording)
(Not available)
When monitoring or talking with a video station during a call,
you can manually record only one snapshot of the image at
the door.
Video
ON
(Auto Recording)
ON/OFF
When there is a call from a video door station, video recording
at the door starts automatically. When [Audio Recording] is
set to ON, the sound at the door is also recorded.
* Audio recording begins after a talking begins. The call tone
is not recorded.
* Video recording stops when the call from or communication
with the door station ends, and the PC master station
returns to the standby mode.
OFF
(Manual Recording)
ON/OFF
When monitoring or talking with a video station during a call,
you can make a video recording at the door manually.
* You can continue recording even if you begin
communicating while the recording of the monitoring image
is in progress.
* When the communication or the monitoring ends, video
recording stops.
NOTES:
When “Video” is selected at [Picture Recording Mode] and [Audio Recording] is set ON in the Setting window (
•
→
“SETTING MANUAL”), the
sounds from a sub station (door station or room sub station) or master station can also be recorded during the auto or manual recording.
Recording can no longer be made if the total amount of recorded fi les exceeds the “Max. Recording Space” set in the Setting window. A balloon
•
appears to show that “Max. Recording Space” is exceeded.