Filter
Top Products
6
GETTING STARTED
PART NAMES
Color monitor IP master station (IS-IPMV)
■
Control panel
Handset (→P. 22)
Hook switch
Speaker
Call tones and communication
sounds are heard from this.
Color LCD monitor
See the next page
for details.
Name card and name plate
Write down the names of stations,
zones, remote sites, etc. registered
to the speed dial buttons on
the card and set it under the
transparent name plate.
Speed dial buttons (1 to 6)
(numbered beginning at the top)
(→P. 32)
Register stations, zones and/
or remote sites you call or select
frequently to each of these buttons.
You can select a station, zone or
remote site simply by pressing the
corresponding button.
Reset button
(under the name card)
Press to reset the master
station.
Do not touch this button.*
PRIVACY button <
PRIVACY
> and
LED (red) (→P. 26)
Press to turn on the PRIVACY function.
TRANSFER button <
TRANSFER
>
and LED (red) (→P. 25)
Press to transfer a call (or
communication) to another master
station or a remote site.
LIST button <
LIST
> (→P. 28)
Press to display the list of the
registered stations, zones or
remote sites.
Transmit LED
(red)
(→P. 21)
Lights up in red while you are talking to the target station,
and turns off while you are hearing the sound at the target
station or no communication is made.
SETTING button <
SETTING
> (→P. 15)
Press to display the setting items.
Door release button <
> (→P. 26)
Press to unlock the door connected to
the received door station.
(Pan & Tilt control button) (→P. 23)
Moves the image on the monitor from right
to left or up and down.
ZOOM/WIDE button <
ZOOM/WIDE
> (→P. 23)
Switches the display mode between zoom and
wide.
ADJUST button <
ADJUST
> (→P. 24)
Adjusts the image on the monitor when it is hard
to see in the daytime or darkness.
Dial keys (→P. 29)
Used to enter the number or
name of a station or zone you
want to search for.
MONITOR button <
MONITOR
> (→P. 34)
Press to monitor the selected door station
or start scan-monitoring.
TALK button <
TALK
> (→P. 21)
Press to answer a call or call the
selected station.
OFF button <
OFF
> (→P. 21)
Press to fi nish communication,
monitoring or calling.
Microphone
Sends sounds from the master
station to other stations.
* The notation in < > is used for operational description in this manual.
Status LED
(red)
Indicates the current status of the
master station by lighting up or
blinking in red (while initializing
the system, being called,
communicating, etc.).
* This may blink when you do not
answer a call, though it is not a
failure.