Filter
Top Products
26
Door release
You can release the door lock while being called from,
communicating with, or monitoring a door station if a door
release device is connected to the station.
Press
while being called from, communicating with,
or monitoring the door station.
The door lock is released for the time set in the System setting
on a PC.
If the set release time is “0”, it can be released while the
*
button is pressed and held.
NOTES:
To enable door release to a door station in a remote site, the
•
appropriate setting must be made at the remote site.
This function is disabled during scan-monitoring. (
•
P. 34)
Using the PRIVACY function
The PRIVACY function of a master station prevents you from
being heard by other master stations (in your site) or remote sites
that call you.
To activate the PRIVACY function
Set the PRIVACY MODE to “1” or “2” in the "INITIAL SETTING".
If you will not use the PRIVACY MODE, set it to “OFF”. (→P. 19)
■
While receiving a call
When the PRIVACY function is activated•
The microphone of your master station is muted, so the
sounds at your side are not heard by the caller.
When the PRIVACY function is off•
The microphone of your master station is enabled, so the
sounds at your side are heard by the caller.
■
To communicate with the caller
When the PRIVACY function is activated•
Press
TALK
or lift the handset, and the microphone is
enabled. Then you can communicate with the caller.
When the PRIVACY function is off•
You can communicate with the caller without pressing
TALK
or lifting the handset.
To mute the microphone temporarily:
*
Press and hold
PRIVACY
, and the microphone is muted.
Release
PRIVACY
to enable the microphone.
The status of master station depending on the
PRIVACY MODE
PRIVACY
MODE
LED
When receiving a call from another
master station or remote site
When communicating
with a door station
1 Lit
The microphone is muted.
•
When you press
•
TALK
or lift the handset to
answer the call, the
microphone is enabled.
Microphone is enabled.
•
The microphone
•
is muted while
pressing
PRIVACY
.
2 Lit
The microphone is muted.
•
When you receive a call
•
from a master station or
remote site, the caller
and you are notifi ed by a
tone that you are in the
PRIVACY MODE. When
you press
TALK
or lift
the handset to answer
the call, the microphone
is enabled.
OFF Off
The microphone is
•
enabled. Communication
starts when a direct voice
call arrives from a master
station in your site or
remote site.
The microphone is
•
muted while pressing
PRIVACY
.
NOTE:
When "COMMUNICATION METHOD" is set to "PTT" (press-to-talk
mode) in the "INITIAL SETTING", you do not have to activate the
PRIVACY function.