Filter
Top Products
21
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING AND ADJUSTMENT
Answering a call
The maximum duration of communication is preset in the
System setting. (It can be set to a maximum of 10 minutes.)
Answer the call in one of the following ways.
1
■
Communication in the hands-free mode
(Available when "COMMUNICATION METHOD" is set
to "HF" in the "INITIAL SETTING")
<When called in from a door station>
Press
1)
TALK
momentarily.
After a beep, you can communicate in the hands-
free mode.
*1: When talking:
(Lit)
When listening to the caller:
(Off)
When you have fi nished the communication, press
2)
OFF
.
Communication will end.
You can communicate in the press-to-talk mode by the
*
following operation even when "HF" is set (e.g., when
it is noisy around you).
Press and hold
•
TALK
for a few seconds while being
called. (Beeps twice and [PRIVACY]
disappears
from the display.)
Press and hold
•
TALK
for more than one second
while communicating. (Beeps once and [PRIVACY]
disappears from the display.)
<When you received a direct voice call from
another master station>
You can talk back to it. If you press and hold
TALK
for
more than one second, it changes to the press-to-talk
mode. (Beeps once and [PRIVACY] disappears from
the display.)
■
Communication in the press-to-talk mode
(Available when "COMMUNICATION METHOD" is set
to "PTT" in the "INITIAL SETTING")
<When called in from a door station>
Press
1)
TALK
momentarily.
After a beep, you can communicate in the press-to-
talk mode.
Press and hold
2)
TALK
to talk and release to listen to
the caller.
When you have fi nished the communication, press
3)
OFF
.
Communication will end.
<When you received a direct voice call from
another master station>
Press and hold
TALK
to talk with and release to listen
to the caller.
*1
(When talking)
(When listening to the caller)
Lit
Off