Filter
Top Products
22
■
Communication by using the handset
<In the hands-free mode>
Lift the handset and you can communicate with the
1)
handset.
* You can also communicate in the press-to-talk
mode by pressing and holding
TALK
.
When you have fi nished the communication, put the
2)
handset on the hook.
Communication will end.
<In the press-to-talk mode>
You can communicate in the press-to-talk mode by
pressing and holding
TALK
even when you are
communicating with the handset.
NOTE:
Communication will end automatically according to the set
communication time.
About the priority
The order of priority for two or more actions (communication,
calling, paging, monitoring, etc.) performed at the same time
is as follows depending on the priority setting.
Priority Setting Action
1 (high) [URGENT], [BROADCAST]*
1
Communication,
calling, paging
2 [PRIORITY]
3 [NORMAL]
4 (low) - Monitoring, scan-
monitoring
Earlier call has priority over later call if the priority setting
*
is the same. When the communication path is occupied,
it is notifi ed by a sound.
Communication takes priority over calling.
*
However, when a call with higher priority comes in, the
communication will be forcibly stopped.
*
1
: [BROADCAST]:
This can be selected only when you perform paging.
When [BROADCAST] is selected, you can perform
paging while interrupting all the other communications of
lower priority. In that case, no receiver can answer you.
NOTE:
When communication is stopped by receiving a higher priority
operation, a notice sound rings.